How Much Clearance Do You Need For a Car Lift?

How Much Clearance Do You Need For a Car Lift? post thumbnail image


The height of your car lift is an important factor in determining the level of clearance required to use it. Whether you use an overhead style or baseplate type of lift, you'll need to allow for additional clearance. There are many options available in Mechanic Superstore when it comes to height of your car lift, but they all require a certain amount of height in order to be usable.


The ANSI/ALI ALCTV standard is a standard for car lift clearance that was updated in 2018. It replaces the ANSI/ALI ALCTV standard from 2011. This new standard was approved by a Nationally Recognized Testing Laboratory (NRTL), and is mandatory for car lifts under the International Building Code and many state regulations. The standard is available in print and is 72 pages long.

The ALI Lift Certification Program is the only program in North America that tests car lift models for compliance with the ANSI/ALI ALCTV standard. This certification process involves thorough evaluation of every component of the lift, including structural integrity, proper lowering speeds, and overload protection. The ALI Lift Certification Program also provides a third-party inspection service for lifts.

XPR-10AXLS Bendpak

When buying a car lift, you need to make sure you have enough room in your garage for it. A good rule of thumb is to allow about 30 to 40 inches of clearance from the floor to the lift. This will ensure that the lift can be safely lowered and placed under the vehicle. Also, make sure the lift has enough space around the workstation so that it is not obstructing the floor space.

For a 2-post lift, you should have at least two feet of space between the lift and the side walls. Anything less than two feet of space will make it difficult to move the vehicle and make repairs. You should also take into account the height of the ceiling when you are calculating the size of the space.

XPR-15AXLS Bendpak

When installing a car lift, you need to consider how much space you have in your garage. This space may vary based on the model of lift you choose. Generally, you will need around 13 feet of space between the lift and the bay door. This is important, because it will allow you to drive your car into the shop without it sticking out the back door.

In addition, there must be enough floor space to accommodate the lift itself. Make sure there is adequate clearance in front of the lift columns, as well as around the work station. The height of the columns should be approximately 10 feet above the floor. Also, you will need to have a ceiling height of at least 11 feet.

XPR-20AXLS Bendpak

When installing a car lift, it is important to consider the space available to the vehicle and surrounding equipment. Typically, a 2-post car lift requires at least two feet between the vehicle and the side walls. Smaller spaces may limit the movement of the vehicle and make it difficult to remove components.

Depending on the model and size of the lift, the required clearance may vary. Make sure to follow installation instructions carefully. If you need to install a lift on a concrete slab, you should leave at least six inches of space between the lift and the bay door. This will allow the car to be driven through the bay door, but will keep it from sticking out the back door.

If you are installing a lift in your garage, you should get help from a professional. It is not an easy task and can be dangerous. You should seek help from a qualified electrician. Also, make sure you have all of the lift's components before installation. These parts include the hydraulics, cables, and locks. You must mark the floor where you plan to install the lift.

XPR-30AXLS Bendpak

If you're planning to install a 4 post car lift, the height you need to reach your garage ceiling varies depending on the model of the lift you're considering. You can consult a vendor or manufacturer for information on the exact requirements for your garage. Ideally, your garage's height should be between 10 and 12 feet.

Typically, you need at least thirty to forty inches of clearance to install a car lift. This amount of space allows you to slide the lift under your car without causing any damage to the floor or vehicle. Additionally, it allows you to safely lower the vehicle's axles and engine gears. Of course, larger vehicles and trucks need more space. While commercial garages usually have plenty of space to install a lift, home garages must make sure the lift's dimensions fit within the garage.

There are two main types of car lifts: platform lifts and asymmetrical arm models. The difference between these two models lies in their lifting mechanisms. The latter has direct-drive cylinders, which eliminates the chance of hydraulic cylinder fluid leakage. While the former may provide the highest clearance, the latter is a two-post model and therefore not a practical solution for your garage.